One supplier - complete innovative solutions for your laboratory requirements



MB PA 60

The MB-PA-60 Clean Jet acts as an effective dust and soot remover with a highly efficient particulate air filtration system. Gas flows through a filter that is controlled by means of electro-pneumatic valves and a blower unit.


During standard operation gas is circulated from the box over the main filter and an additional safety filter. After passing through the blower and a heat exchanger it is blown back into the box. The system therefore represents the classical function of a vacuum cleaner under inert gas conditions.


Additionally the MB-PA-60 Clean Jet is equipped with a single filter column. Clogging of the filters is observed by a differential pressure gauge and at a preset pressure. The cleaning procedure is started on the touch panel of the connected gas purification and is completed via pressure shock. The dust from the main filter is collected in a particle container.


This particle container and the filter itself can be removed from the system. The cleaning of the filter column is controlled by a separate function that is available when the Clean Jet MB-PA-60 has been switched off. All filters and the particle container can be separated from the piping without exposing the piping or the attached glovebox to the ambient atmosphere.


After cleaning the filter housing, the collecting vessels are manually evacuated and refilled with inert gas prior to the start of the vacuum cleaner to prevent contamination of the attached glovebox system.

Fields Marked with a * are required
*First Name
Last Name
Phone Number
Comments enquiry